9

REASONS TO

USE CAD-CON 1000™

1. You want a total solution for Alloy Tank Wastewater. 
Cad-Con 1000™ provides reliable treatment of tank waters and wastes contaminated with blocking alloy metals. It also works independent of the pH and over a wide range of acidic and alkaline waters.

2. Effective treatment for the hazardous waste component is a must.
In an extreme case study, Cad-Con 1000™ reduced alloy tank water with 280 mg/l cadmium and 250 mg/l lead to a TCLP of essentially zero (below .002 mg/l). The threshold limits for hazardous waste are 1 mg/l cadmium and 5 mg/l lead.

3. Effective treatment for the water component is also a must.
The liquid portion (water) must be suitable for discharge to your local sewage treatment plant. Dissolved cadmium and lead are typically reduced well below your local sewer discharge limits.

4. You need something that works consistently each time it is used.
Because Cad-Con 1000™ is used as a batch treatment of your waste:

• It is always full strength,
• It never looses potency,
• Its effectiveness is never diminished over time.

5. You need a product that’s easy to use. Cad-Con 1000™ is easy to use, simple to incorporate into your existing process. Just:

• Drain your alloy reclaim tank into a suitable container,
• Treat (mix in Cad-Con 1000™ and let stand),
• Clarify (filter or let sediment settle to the bottom),
• Dispose (clear water to drain, sediment to trash).

6. You don’t need any additional problems.
And you won’t get any when you use Cad-Con 1000™:

• Its non-hazardous,
• It generates no residual hazardous wastes (like filters to send back),
• It generates no noxious odors or gases,
• It generates no foaming, and
• It works with your Panhandler treatment unit or other equipment (If you use it).

7. You want to keep your compliance costs to a minimum.
Cad-Con 1000™ is inexpensive; For the typical 5-gallon alloy reclaim tank, Cad-Con 1000™ can provide absolute compliance protection for less than $4.00 per week.

8. You don’t want to risk an EPA violation.
Improper disposal of alloy tank water is the optical lab’s most serious environmental risk and state and federal enforcement agencies are increasingly pursuing violators with personal and even possiblecriminal liability.

9. If you’ve read this far, you obviously have a need.
So what are you waiting for? Order before June 1st and receive one of the following generous discounts.  Just call 513-779-2999 or send an e-mail to Geo-Chem@cinci.rr.com:

• Order 1 bucket (8 lbs) and get 10% off the normal $199 price (save $20)
• Order 2 buckets get 15% off both buckets (save $60 off the regular price)
• Order 3 buckets get 20% off all 3 buckets (save $120 off the regular price)
• Order 4 buckets get 25% off your entire order (save $200)  

 CAD-CON 1000™

Waste Treatment Additive

Effective, reliable treatment for Optical Laboratory alloy reclaim tank wastewater

Manufactured & Distributed by: Geo-Chem Technologies, 7125 Lakota Ridge Drive, Liberty Twp, OH 45011

E-mail: Geo-Chem@cinci.rr.com                                       Telephone: (513) 779-2999